Find out how to Wire A 2 Position Toggle Switch
The most common electrical switch in homes is known as a two-position toggle switch. This sort of switch lets the user either allow or stop the flow of electricity to a given application by moving the switch between the on and off positions. While these kind of switches are very durable, they do fail on occasion. Whether you’ll be replacing a faulty switch or installing a brand new one, it is important to know easy methods to properly wire a two-position toggle switch.
Things You will Need
Phillips head screwdriver
Turn off the facility to the switch on the breaker box.
Locate the two terminal screws which are on the toggle switch (one a silver color and one brass color) and the 2 electrical wires coming from the breaker box (one white and one black).
Strip off about 1/4 inch of the sheathing on each of the wires.
Use a pair of needle-nose pliers to bend the stripped end of every of the wires right into a loop.
Loop the tip of the black wire over the screw on the brass-colored terminal, with the sheathing-to-loop running in the identical direction because the threads, not against the direction of the threads. Loop the white wire over the screw on the silver terminal in the same way. Don’t be concerned if you can’t determine the colors with certainty, you’ll be able to always switch the wires and terminals in the alternative manner and the switch will still work, but in the opposite direction.
Tighten down the screws on the terminals with a Phillips head screwdriver, and you’ve got successfully wired a toggle switch.
Tips & Warnings
White wires should generally be attached to light-colored terminal screws similar to silver. Black wires should generally be attached to dark-colored screws corresponding to brass colored. If the terminal screws are the same color, either wire can generally be attached to either terminal. Green terminal screws are for grounding wires.
How to put in an Electric Switch
Promoted By Zergnet