Easy methods to Replace A Single Pole Switch In your home

The right way to replace a single pole switch in your house.

You’d think installing a switch in your home can be a simple task but with today’s homes getting larger and bigger this will not be so simple as you think. The very first thing you have to do is find out what type of switch you need to buy. There are 3 basic sorts of switches in your home, a single pole switch, a 3 way switch, and a four way switch.

Black 1 Gang 1 Way Wireless Touch Screen Light Switch 86

When you’ve got any questions please ask within the comment link below, I’ll answer them to the better of my ability, also if in case you have future projects that you prefer to step-by-step instructions please post within the comment box I will usually answer the identical day.

A single pole switch is a switch which operates a light from a single location. These by far are the easiest to replace. Somewhat trick electricians use to identify these switches without even taking anything apart is to see if the switch says “on” or “off”. In case you are not sure what kind of switch you’ve gotten this is a straightforward technique to identify whether or not you could have a single pole switch. The 2 other sorts of switches wouldn’t have “on” or “off” written on them. If your switch is a single pole switch follow these steps:

1) Tools.
a) Thin flat head screw driver
b) Phillips head screw driver
c) drill(optional)
d) wire strippers(maybe)
e) ac tester

2) Go to the store and buy the one pole switch. Sure you may get everything ready now but when you are taking everything apart now and go to the shop. There could also be wires which are live within the box that you do not find out about and leaving an open box unattended is dangerous. Even in case you shut all the ability off, you probably have anyone at home you don’t want the facility to be turned on while your not around. This is electricity SAFETY FIRST!!!!!

3) Shut the power off to the switch. If your old switch still works (yes people change switches that still work) turn it on. Go to your panel (your panel has the breakers or the fuses in it) and turn the breakers off one by one. Changing a switch is a one man job but if you want to avoid running back a forth another person standing there and yelling at you when the sunshine shuts off helps. Or shutting all the breakers off and the principle just to make certain is what I would recommend. That is electricity SAFETY FIRST!!!!!

4) Remove the plate cover from the switch. This will be the best a part of your project. On the top and bottom of the switch there shall be small screws. You’ll need the thin flat head screwdriver to remove these. If the situation you are installing the switch has multiple switches you will need to remove all of the plate screws. Then remove the plate and place the screws and the plate together for replacing later. Do not lose those little screws believe me they’re easy to lose.

5) Remove the switch. OK the fun part. Take a drill or a Phillips head screw driver and take out the screws on the top and bottom of the switch. Now grab the yoke of the switch(that’s the top and bottom of the switch) do not grab the switch by the side we want to make sure the facility is off and the only option to do this is to pull out the switch. The facility is located on the side so should you grab it by the sides and for some reason the power is still on you’re going to get shocked. That is electricity SAFETY FIRST!!!!! So grab the yoke and pull out the switch. In case you are in a box with multiple switches you could have to remove multiple switches to be able to tug your switch out far enough to simply work on it. Wires commonly get stuck behind other switches so take the additional step you will wind up doing it anyway after trying to work with short wires and fail. Trust me I tried too.

6) Check and make sure power is turned off!!!! This is crucial a part of this project. Your tester should have a black and red lead on it. Set your tester to 120v ac and place one lead on one of the screws of the switch and the other lead on the metal box. If you don’t have a metal box then you definately definitely have romex and you should have bare wires in the box. These bare wires are your ground, place your other lead on the bare wires. In case you do not need a metal box or bare wires Stop and call an electrician, we’d like to make sure the power is off. I am sorry but we don’t want anyone getting hurt. While keeping your one lead on either the box or the bare wires place the opposite lead on each screw ensuring that your meter shows no power. I do not wish to scare anyone nevertheless it does hurt once you get shocked and most significantly it could actually kill you. Electricity is fun for me and i work with it everyday but you probably do not, so be careful.

7) Take the wires off the switch. This is simple for a single pole switch because there are only two wires and it would not matter where they go so unscrew your two screws (when you’ve got greater than two screws and two wires connected stop, you do not need a single pole switch, I shall be publishing instructions on how to put in these soon, follow those instructions.) and remove the 2 wires.

8) Connecting the brand new switch. Pick up your switch and ensure it’s a single pole switch. It should say “on” and “off” and only have two screws. Hold it along with your left hand so the screws face up and the decorative side is facing you. Take either one of the wires and wrap it around one screw. It doesn’t matter which and tighten the screw. Ensure that the wire is completely under the screw. You could have to strip a bit more insulation off the wire to get a great loop across the screw. Sometimes the loop is simply too long and chances are you’ll have to shorten the exposed copper in your wire. If you might want to make a new loop that is the way you do it. Strip about an inch of exposed copper in your wire. To make an excellent loop your strippers usually have a small hole near the teeth of the tool. Place the wire half way into the outlet and bend, that should give you a pleasant loop. Take the remaining wire and wrap it across the remaining screw and tighten.

9) Installing the brand new switch. Your switch at this point must be facing you. Look at it and ensure your switch is not the wrong way up. You do not need to put everything back and find out that down is on. Look closely and flip the switch to the “on” position. If the switch says “no” flip it over. Also the wires must be connected on the fitting side of the switch. OK now carefully push the switch into the position. While pushing the switch within the wires must be pushed in so they fall easily into the box. It takes practice so get the wires in there so it doesn’t look like a knot. The two screws on the switch’s yoke ought to be lined up with the holes on the highest and bottom of the box. Screw the highest one in almost all the best way. Now screw in the underside one so the yoke touches the drywall. Finish screwing in the highest screw so the the switch is snug to the drywall. Do not over tighten just snug. This probably made the bottom one lose so make that one snug too.

10) Finishing. Put the plate back on. Please for me sure your screws are all facing the same way in your plate(i do know but its a pet peeve) If your box has multiple switches you may must slide your switch left or right to get the plate on. Turn the ability on because you just finished installing your first switch. Enjoy

For those who found this helpful please click on one of the ads at the top or bottom of the page for support.


Check your state and local codes before starting any project. Follow all safety precautions. Every effort has been made to ensure accuracy and safety. I can’t be held accountable for damages or injuries resulting from using the knowledge on this document.


Leave a Reply

Your email address will not be published.