ADT Pulse Light Switches, Dimmers And Modules

Lighting control is out there to all ADT Pulse Level III customers. Those that’ve expereinced it know that ADT Pulse Light switches, Dimmers and Modules are pretty darn cool, but are you utilizing all of the features that might benefit your family? In fact they are often controlled from anywhere and at any time in your web enabled device. Additionally they play an integral part of your own home security. Certainly no burglar wants to have the lights on him. Sufficient lighting around the perimeter together with interior lighting that makes it look as in case you are always home can help deter many would-be burglars. Lighting control may help save money and energy, and add convenience to your busy life style.

ADT Pulse Light Switches, Dimmers and Module Options

Your ADT Pulse system offers two main Z-wave options for lighting control. First is your ADT Pulse compatible In-wall Light Switches, available in white or light almond, and as a dimmer or on/off (toggle) switch. These switches replace your existing light switches and needs to be installed by your ADT Pulse technician, an electrician or someone familiar with and comfortable with electrical work. All switches have a convenient small blue light that makes it easy to seek out switches in the dark.

Next you may have Z-wave light modules. These modules plug into the wall and your light or small appliance plugs into the module. The module either allows or stops the flow of electricity to whatever you plug into it. They are also available in white and light almond and as a dimmer or an on/off module. Please note that the all Z-wave dimmers usually are not recommended for fluorescent lighting and the dimmer module is for lights only. All of these options can be controlled manually or remotely from any web enabled mobile device. See an inventory of ADT Pulse compatible Z-wave products here.

Experience automated lighting control where your lights activate and off at set times, in response to other events like your smoke detectors activating, or as part of a mode that controls your entire ADT Pulse devices with one command. Call us now to set up your No-Cost In-Home Security Review and see ADT Pulse in action. Read on for lighting specifics or to learn how to program you ADT Pulse lighting scenarios.

Managing ADT Pulse Lighting Options

Turn the sunshine on by clicking Activate.
Turn the sunshine off by clicking Turn Off.
Change the light’s brightness level (for dimmers only) by selecting the desired level from the Brightness drop-down list and then clicking Set.

After making changes, a message confirms that the change will happen in just a few seconds. Click OK. You return to the Summary tab, and moments later the change appears in the opposite Devices section.

When using a mobile device, use the tab bar across the top of your own home screen to select the Lights tab. The Lights tab shows an inventory of lighting devices installed with their current statuses. If they’re on, there might be an off button to turn them off and vice versa. Devices with dimming capabilities can have a brightness bar. Slide the control to the appropriate to brighten and to the left to dim, the brightness percentage will show below the turn on/turn off button. Easy Peasy. Let us take a look at ways to arrange automatic lighting…

Arrange Schedules for your ADT Pulse Lighting Devices

Probably the most typical safety precautions while you are away from home is making your empty house look occupied. Using schedules, you possibly can set the lights in your home to come on and off at strategically set times or on a random schedule. You arrange your schedules in the net Portal. To create a brand new schedule, use your ADT Pulse login, open the Schedules tab and click Add Schedule, you then see the “Add Schedule pop-up windowthat looks like this:

Fill in the pop-up as follows:

– Name: Vacation Lighting Schedule (or whatever name you choose)
– When: 7am to 10pm (Click “more options” to pick out an end time and randomize options)
– Days: Monday through Sunday
Randomize
– Active in Selected Modes: Security System: Armed Away and Modes: Out for the Day, Be Right back and Vacation
– Click the Add Action button.

No Delay
Turn Office 1 Lamp on to 80%.

Wait 5 Minutes
Turn Living Room Light on
– Click OK

Select End Action

No Delay
Turn Office 1 Lamp off
– Click OK

Wait 30 minutes
Turn Living Room Light off
– Click OK

Now the office lamp will turn on to 80%, at random times between 7am and 10pm, the living room light will turn on 5 minutes later and the office lamp will turn off. 30 minutes later the living room will turn off. By clicking Repeat instead of Randomize, you’ll be able to set the lights to repeat at selected intervals equivalent to every few minutes or every couple hours.

Wireless White 1 Gang 1 Way Touch On Off Switch For Lamps 86

When adding an action, you possibly can add another action as many times as you like and with different devices a well. For instance, use back door camera to take an image of you classic 1969 Camaro sitting in the drive way so you don’t have to fret if she’d gone. pictures.

Controlling Your ADT Pulse Lighting with Automations

An Automation is an action that you need to happen every time something else happens. For instance, you can save energy by turning lights and media center power off when the system is armed to away or turn all lights on when a security alarm is active. Let’s set those up. In your Automations tab, click Add Automation to get the “Add Automation Window.”

– Trigger: Security Panel
– Event: Armed Away
– Active: Always

– Delay: Wait 5 Minutes
– Select Action: Turn Living Room Light Off

– Delay: No Delay
– Select Action: Turn Office 1 Light Off (Add Another Action add each lights)

– Delay: No Delay
– Select Action: Turn Media Power Off
– Click OK

Fill it out as follows for example 2:

– Trigger: Security Panel
– Event: General Alarm
– Active: Always

Click: Add Action

– Delay: No Delay
– Select Action: Turn Living Room Light On

Click: Add Another Action

– Delay: No Delay
– Select Action: Turn Office 1 Light On (Add Another Action to add each light)
– Click OK

Now your lights will turn off when the security system is armed to away so that you are not paying for energy while you are out, and if your alarm is activated for any reason, the lights will come oneso you can see your approach to safety or to scare a would-be intruder away.

Controlling Your ADT Pulse Lighting as A part of a Mode

We already set up one great lighting schedule in your vacations. A different idea could be to have exterior lights come on at 6pm and automatically turn off at 1am. You might set another schedule for these exterior lights. The “Add Schedule” screen asks for the “Active” times. Using the “Active Drop-Down Menu”, select “In Select Modes,” and specify what modes the action needs to be active in. Default is set to always (all selected) deselect the options that you don’t need.

To complete your Vacation Mode, set a schedule in your thermostat, have the cameras take a picture of anyone that comes to the front door and email it to you, and the locks could lock 5 minutes after Vacation Mode is activated. (See organising modes for step-by-step set-up) That is how modes uses your lighting devices with the remainder of your ADT Pulse system to bring you great home automation. Modes combine automations, schedules and alerts with you your cameras, climate control, lighting control and the perfect home security available. One command prompts multiple actions. While organising a yoru first mode may take a chunk of your time, your second will take minutes and you’ll be a professional. The flexibility to select a mode and set your entire home to autopilot is well well worth the time investment

Do It Yourself ADT Pulse Lighting Options

Although some electrical understand how is required to put in the Z-wave light switches, lots of you’ll haven’t any problem doing it yourself. Alternatively, if you can plug a coffee pot into the wall, you’ll be able to install a small appliance/lamp module with ease. An ADT Pulse system can have up to 64 Z-wave devices. So after your ADT Pulse Thermostats and Door Locks, you may add a considerable amount of lighting controls. Adding them to your ADT Pulse system is just a few quick steps.

So as to add a device, go into your Web Portal’s Systems tab and click on the Devices tab, then click the Manage Devices button.

The “Manage Devices WindowAppears; Select Lights, Thermostats & More. Select your device from the pull down menu and follow the instructions to learn it into your system, now repeat for each new device you are installing. If DIY shouldn’t be for you, in fact you may have ADT come out and add upgrades.

Your ADT Pulse Lighting Devices are great tools for security and convenience. There may be peace of mind coming home to a well-lit home and peace of mind that burglars don’t want to visit a well-lit home. And who wouldn’t want to plug the coffee pot into an appliance module and schedule it to turn on just before you rise up within the morning. Leave us a comment on how you’re using your light switches and appliance/lamp modules! When you don’t have a Pulse Level III system with home automation yet, give us a call today at 800-310-9490 and put your home on auto-pilot.

admin

Leave a Reply

Your email address will not be published.