507pb push button switch,12v touch switch

3 gang intermediate switch, 507pb push button switch,Sales & Support for Touch Sensors & Capacitive Switch Technology.,

How to Wire A 15A 120V Cooper Light Switch 1301-7W

Wireless Touch Switch Black 1 Gang 1 way Light SwitchThe 15- amp 120-volt Cooper Light Switch 1301-7W is the usual style of switch used in modern construction. Wiring is done in the same method as every other switch. 507pb push button switch A switch provides a mechanical method for opening and closing a circuit. They are typically connected using 14/3 gauge electrical wire. This provides three connections to finish the circuit. The black wire delivers the electricity from the panel, the white wire provides the path back, and the green or bare wire is the backup safety system.

Things You will Need
Non-contact voltage detector
Wire strippers
Wire nuts
Turn off the ability to the wires you’re engaged on on the distribution panel. Double check that the ability is off by touching a non-contact voltage detector to the wire’s insulation.

Strip 3/8 inches of insulation from the three wires coming from the distribution panel and the three wires going to the sunshine.

Loosen the 2 terminals on the Cooper light switch with a screwdriver. Wrap the black wire from the distribution panel around the underside right terminal and tighten it down. Wrap the black wire from the sunshine around the highest right terminal and tighten it down.

Loosen the grounding screw within the back of the electrical box with the screwdriver. Wrap both green or bare wires around this screw and tighten it down.

Twist the 2 white wires together with pliers and install a wire nut on top.
ACE Hardware: Cooper Wiring Devices 1301-7W White Grounded Toggle Switch

507pb push button switch


Leave a Reply

Your email address will not be published.